IFM AL5251
Demander un devis
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | IO-Link - pneumatic modules |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand AL5251 peut-il être expédié ?
AL5251 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer AL5251 en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour AL5251 et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour AL5251, selon la disponibilité et la destination.
For the decentralised triggering of cylinders and valve actuators High energy efficiency due to decentralised application near the actuator Reduced installation and wiring complexity Easy toolless installation and wiring thanks to quick mounting technology Combination of an IO-Link device and a solenoid valve
Caractéristiques
Product characteristics
| Number of inputs and outputs | Number of digital inputs: 8; Number of pneumatic outputs: 2 |
Application
| Design | housing for DIN rail mounting |
| Application | field installation; for use in wet environments |
| Media | compressed air |
| Medium temperature[°C] [°C] | -10...50 |
Electrical data
| Operating voltage[V] [V] | 18...30 DC; (to SELV/PELV) |
| Nominal voltage DC[V] [V] | 24 |
| Current consumption[mA] [mA] | 80...680; (24 V DC, full load) |
| Overvoltage category | II |
Inputs / outputs
| Number of inputs and outputs | Number of digital inputs: 8; Number of pneumatic outputs: 2 |
Inputs
| Number of digital inputs | 8; (4 x 2) |
| Input circuit of digital inputs | PNP |
| Sensor supply of the inputs | US |
| Power supply[V] [V] | 18...30; (from operating voltage) |
| Max. total current rating of inputs[mA] [mA] | 400 |
| Input current High[mA] [mA] | 2...3.5 |
| Input current Low[mA] [mA] | 0...1.5 |
| Switching level high[V] [V] | > 11 |
| Digital inputs protected against short circuits | yes |
Outputs
| Number of pneumatic outputs | 2 |
| Actuator supply outputs | US |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Common - I&D; Identification and Diagnosis; Function; Locator; Function; ProductURI |
| Common - I&D | Identification and Diagnosis |
| Function | ProductURI |
| SIO mode | no |
| Required master port type | A |
| Min. process cycle time[ms] [ms] | 2.7 |
| Supported DeviceIDs | default; 1505 |
| default | 1505 |
Operating conditions
| Ambient temperature[°C] [°C] | -10...55 |
| Note on ambient temperature | Switching frequency < 1,66 Hz: -10...50 °C; Switching frequency > 1,66 Hz: -10...55 °C |
| Max. relative air humidity[%] [%] | 90; (non condensing) |
| Max. height above sea level[m] [m] | 4000 |
| Protection | IP 65; IP 67 |
| Pollution degree | 2 |
Mechanical data
| Weight[g] [g] | 292 |
| Housing | rectangular |
| Type of mounting | mounting on DIN rail; quick mounting; AS-i flat cables directly connectable; (TH35 (EN 60715)) |
| Dimensions[mm] [mm] | 109 x 85 x 52 |
| Materials | housing: PA 6.6; AirBox housing: PA 6; Sealing: TPE; O-rings: NBR |
| Pneumatic system | 1 x 5/2-way slide valve (free from overlapping); bistable |
| Operating pressure range | 3...8 bar; 43.5...116 psi |
| 3...8 bar | 43.5...116 psi |
| Air flow at 6/5 bar[l/min] [l/min] | 500 |
| Permissible compressed air | non-lubricated compressed air class 6-3-1; lubricated compressed air class 6-3-4 |
| Manual override | pressing/releasing or pressing/turning/locking |
| Tube fittings | 8 mm |
| Exhaust | exhaust can be discharged through tube connection |
Displays / operating elements
| Display | operation; LED, green; errors; LED, red; function; LED, yellow |
| operation | LED, green |
| errors | LED, red |
| function | LED, yellow |
Accessories
| Items supplied | lower part |
| Accessories (optional) | Mounting plate:, E74999; Module lower part:, E75000; Protective cap: M12, E73004; sealing plugs:, E75231; silencer:, E75232; Push-in L-fitting:, E75228; Push-in T-fitting:, E75227 |
Remarks
| Remarks | If not pneumatically operated, E75231 sealing plug must be inserted.; Avoid ingress of dirt and dust.; Do not connect any of the following points to an external potential:; L-, L+, I-1, I-2, I-3, I-4; Please see the notes on compressed air and EMC/ESD under "Downloads" |
| Pack quantity | 1 pcs. |
Electrical connection - socket
| Connector | 4 x M12; coding: A |
Electrical connection - plug
| Connector | 1 x M12; coding: A |









