IFM AL4302
Demander un devis
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | Ethernet I/O modules for factory automation |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand AL4302 peut-il être expédié ?
AL4302 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer AL4302 en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour AL4302 et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour AL4302, selon la disponibilité et la destination.
Fieldbus module with digital inputs and outputs Direct connection of actuators and sensors to the fieldbus for a clear wiring structure Connection of large actuators possible High-frequency counter function with the option of direct switching of the outputs Daisy-chain power supply with standardised L-coded M12 connection technology
Caractéristiques
Application
| Application | I/O modules for field applications |
| Daisy-chain function | power supply; fieldbus interface |
Electrical data
| Operating voltage[V] [V] | 20...30 DC; (US ; to PELV) |
| Current consumption[mA] [mA] | 300...3900 |
| Protection class | III |
| Additional voltage supply[V] [V] | 20...30 DC; (UA) |
| Max. current load total[A] [A] | 3.6 |
| Current rating per port[A] [A] | 3.6 |
Inputs / outputs
| Number of inputs and outputs | Number of digital inputs: 8; Number of digital outputs: 8 |
Inputs
| Number of digital inputs | 8; (type 2 according to IEC 61131-2) |
| Switching level high[V] [V] | 11...30 |
| Switching level low[V] [V] | 0...5 |
| Digital inputs protected against short circuits | yes |
Outputs
| Number of digital outputs | 8 |
| Short-circuit proof | yes |
| Max. current load per output[mA] [mA] | 3600 |
Software / programming
| Parameter setting options | counter function |
| Functions and parameters | function; CTU (Up Counter), CTD (Down Counter), CTUD (Up-Down Counter), CTDIR (Direction Counter); switching function (SSC); single point, two point, window, latch; number; 4 (1 counter for each input port); count frequency; 4500 Hz; main counter; 32 Bit (0…4.294.967.295); batch counter; 16 Bit (0…65.535) |
| function | CTU (Up Counter), CTD (Down Counter), CTUD (Up-Down Counter), CTDIR (Direction Counter) |
| switching function (SSC) | single point, two point, window, latch |
| number | 4 (1 counter for each input port) |
| count frequency | 4500 Hz |
| main counter | 32 Bit (0…4.294.967.295) |
| batch counter | 16 Bit (0…65.535) |
Interfaces
| Communication interface | Ethernet |
| Transmission standard | 100Base-TX |
| Transmission rate | 100 MBit/s |
| Protocol | PROFINET |
| Factory settings | IP address: 0.0.0.0; subnet mask: 0.0.0.0; gateway IP address: 0.0.0.0; MAC address: see type label |
| Note on interfaces | CC-C (Conformance Class C) (IRT-Switch); S2 redundancy; Netload Class III; CiR (Configuration in Run); SNMP (Simple Network Management Protocol); MRP (Media Redundancy Protocol); Supported network topologies: line; ring |
Operating conditions
| Ambient temperature[°C] [°C] | -25...60 |
| Storage temperature[°C] [°C] | -25...85 |
| Max. relative air humidity[%] [%] | 90 |
| Protection | IP 65; IP 66; IP 67 |
| Protection rating (NEMA 250) | 6P |
| Pollution degree | 2 |
| Chemical media | ISO 16750-5; AA, BA, BD, HLP, CC, DB, DC, DD, CA; NEMA 250 5.13.1; AA |
| ISO 16750-5 | AA, BA, BD, HLP, CC, DB, DC, DD, CA |
| NEMA 250 5.13.1 | AA |
Tests / approvals
| EMC | EN 61000-6-2; EN 61000-6-4 |
| Shock resistance | DIN EN 60068-2-27 |
| Vibration resistance | DIN EN 60068-2-64 2009-04; DIN EN 60068-2-6 2008-10 |
Mechanical data
| Weight[g] [g] | 421 |
| Housing | rectangular |
| Type of mounting | backplane mounting |
| Dimensions[mm] [mm] | 208 x 59.3 x 38.4 |
| Materials | housing: PA orange; socket: brass nickel-plated |
| Sealing material | FKM |
Remarks
| Remarks | For further information please see the operating instructions.; Using the device within a system with requirements for functional safety is possible by deactivating the actuator voltage UA without interaction.; For further information on functional safety, please refer to the operating instructions supplement under “Downloads”. |
| Pack quantity | 1 pcs. |
Electrical connection - Ethernet
| Connector | M12; coding: D; Sealing: FKM |
Electrical connection - inputs / outputs
| Connector | M12; coding: A; Sealing: FKM |
Electrical connection - power supply IN
| Connector | M12; coding: L |
Electrical connection - power supply OUT
| Connector | M12; coding: L; Sealing: FKM |







