ISO cylinder-DSBF-C-...-40- -
Demander un devis
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | DSBF |
| Cycle de vie | active |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand DSBF-C-...-40- - peut-il être expédié ?
DSBF-C-...-40- - est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer DSBF-C-...-40- - en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour DSBF-C-...-40- - et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour DSBF-C-...-40- -, selon la disponibilité et la destination.
ISO 15552 , Increased corrosion protection , Easy-to-clean design , FDA-approved lubrication and sealing on the basic version , Long service life thanks to optional dry-running seal , Self-adjusting pneumatic end-position cushioning saves time during commissioning and adapts optimally to load and speed changes , For position sensing , Sustainable thanks to extended life cycle and easier repairs
Caractéristiques
Specifications
| Stroke | 1, 2800 mm |
| Piston diameter | 40 mm |
| Piston rod thread | M8, M12x1.25 |
| Based on standard | ISO 15552 |
| Cushioning | Elastic cushioning rings/plates at both ends, Self-adjusting pneumatic end-position cushioning, Pneumatic cushioning, adjustable at both ends |
| Mounting position | optional |
| Conforms to standard | ISO 15552 |
| Piston-rod end | Male thread, Female thread |
| Design | Piston, Piston rod, Profile barrel |
| Position detection | Via proximity switch |
| Symbol | 00991217, 00991218, 00991235, 00991237, 00992970, 00992971 |
| Variants | Extended male piston rod thread, Piston rod with female thread, Extended piston rod, Uniform, slow movement, Low friction, Through piston rod, Heat-resistant seals max. 120°C, Temperature range 0 to 150°C, Temperature range -40 to 80°C |
| Operating pressure | 0.1, 12 bar |
| Mode of operation | Double-acting |
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) |
| UKCA marking (see declaration of conformity) | To UK EX instructions |
| Explosion protection | Zone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T4 Gb |
| Explosion ignition protection type for dust | Ex h IIIC T120°C Db |
| Explosion ambient temperature | -20°C <= Ta <= +60°C |
| Explosion protection certification outside the EU | EPL Db (GB), EPL Gb (GB) |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 3 - high corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L, VDMA24364 zone III |
| Suitable for use with food | See supplementary material information |
| Ambient temperature | -40, 150 °C |
| Impact energy in end positions | 0.35, 0.7 J |
| Cushioning length | 18, 19 mm |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 633 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 633, 754 N |
| Additional weight per piston rod extension of 10 mm | 16 g |
| Additional weight per piston rod thread extension of 10 mm | 8 g |
| Type of mounting | Via female thread, With accessories |
| Pneumatic connection | G1/4 |
| Note on materials | RoHS-compliant |
| Material cover | Coated die-cast aluminium |
| Material piston seal | FPM, TPE-U(PU) |
| Material piston | Wrought aluminium alloy |
| Material piston rod | High-alloy stainless steel, hard chrome-plated, High-alloy stainless steel |
| Material piston rod wiper | FPM, PE, TPE-U(PU) |
| Buffer seal material | FPM, TPE-U(PU) |
| Material of cushioning boss | Aluminium, POM |
| Material cylinder barrel | Anodised wrought aluminium alloy |
| Material nut | High-alloy stainless steel |
| Material rod wiper | PTFE reinforced |
| Material bearing | Bronze, Metal polymer compound, POM |
| Material collar screws | Galvanised steel |
Plus de pièces Festo
OccasionFesto 560207 - HGPT-25-A-B-F Used
Disponible sur demandePush-in connector-NPQP-D-Q6-S8-FD-P10
Disponible sur demandePush-in T-fitting-NPQE-LT-R18-Q4-P10