ISO cylinder-DSBC-...-40- -

Name: ISO cylinder-DSBC-...-40- -
Brand: Festo
SKU: DSBC-...-40- -

Référence: DSBC-...-40- - · Marque: Festo

Prix sur demande

Demander un devis

Garantie de 12 mois (neuf) · 3 mois (occasion/reconditionné)

Retours sous 30 jours, sans frais de réapprovisionnement sur les pièces non utilisées

Expédié via

En bref

Disponibilité	Confirmation sur demande
Catégorie	DSBC
Cycle de vie	active
Garantie	12 mois (neuf) · 3 mois (occasion/reconditionné)

Livraison & disponibilité

Quand DSBC-...-40- - peut-il être expédié ?

DSBC-...-40- - est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.

Puis-je récupérer DSBC-...-40- - en personne ?

Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.

La livraison express est-elle disponible ?

Oui — mentionnez-le lors de votre demande de devis pour DSBC-...-40- - et nous inclurons les options de livraison express dans notre réponse.

Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?

En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour DSBC-...-40- -, selon la disponibilité et la destination.

Self-adjusting pneumatic end-position cushioning saves time during commissioning and adapts optimally to load and speed changes , ISO 15552 (ISO 6431, VDMA 24562) , Sustainable thanks to extended life cycle and easier repairs , Standard profile with two sensor slots , Wide range of variants for customised applications , Comprehensive range of mounting accessories for just about every type of installation , For position sensing , Variants recommended for production systems for manufacturing lithium-ion batteries

Caractéristiques

Specifications

Stroke	1, 2800 mm
Piston diameter	40 mm
Piston rod thread	M8, M12x1.25
Torsional backlash at piston rod +/-	-0.6, 0.6 deg
Based on standard	ISO 15552
Cushioning	Elastic cushioning rings/plates at both ends, Self-adjusting pneumatic end-position cushioning, Pneumatic cushioning, adjustable at both ends
Mounting position	optional
Conforms to standard	ISO 15552
Piston-rod end	Male thread, Female thread
Design	Piston, Piston rod, Profile barrel
Position detection	Via proximity switch
Symbol	00991217, 00991218, 00991235, 00991237, 00991257, 00991258, 00991907, 00991910, 00992970, 00992971
Variants	Extended male piston rod thread, Piston rod with female thread, Extended piston rod, Low friction for balancer applications, Metal scraper, With protection against rotation, Uniform, slow movement, Low friction, Through piston rod, Heat-resistant seals max. 120°C, Sensor slots on 3 profile sides, Temperature range 0 to 150°C, Temperature range -40 to 80°C, Piston rod at one end
Mode of operation clamping unit	Retracting, Advancing, Static, Released through compressed air, Frictional clamping with spring force
Static holding force of clamping unit	1000 N
Axial backlash clamping unit	0.5 mm
Clamping unit release pressure	3 bar
Mode of operation end-position locking	Positive interlocking with stop cylinder, Released through compressed air
Static holding force of end-position locking	500 N
Axial backlash end-position locking	1.3 mm
Unlocking pressure	2.5 bar
Locking pressure	0.5 bar
Operating pressure	0.1, 12 bar
Mode of operation	Double-acting
CE mark (see declaration of conformity)	To EU Explosion Protection Directive (ATEX)
UKCA marking (see declaration of conformity)	To UK EX instructions
Explosion protection	Zone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX)
ATEX category gas	II 2G
ATEX category dust	II 2D
Explosion ignition protection type for gas	Ex h IIC T4 Gb
Explosion ignition protection type for dust	Ex h IIIC T120°C Db
Explosion ambient temperature	-20°C <= Ta <= +60°C
Explosion protection certification outside the EU	EPL Db (GB), EPL Gb (GB)
Operating medium	Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium	Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC	2 - Moderate corrosion stress, 3 - high corrosion stress
LABS (PWIS) conformity	VDMA24364-B1/B2-L, VDMA24364 zone III
Ambient temperature	-40, 150 °C
Impact energy in end positions	0.2, 0.7 J
Cushioning length	19 mm
Max. torque for protection against torsion	1.1 Nm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke	633 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke	633, 754 N
Additional weight per piston rod extension of 10 mm	16 g
Additional weight per piston rod thread extension of 10 mm	8 g
Type of mounting	Via female thread, With accessories
Pneumatic connection	G1/4
Note on materials	RoHS-compliant
Material cover	Coated die-cast aluminium
Material spring	Spring steel, High-alloy stainless steel
Clamping unit housing material	Anodised wrought aluminium alloy
Material housing end-position locking	Anodised wrought aluminium alloy
Material piston seal	FPM, HNBR, TPE-U(PU)
Material clamping jaws clamping unit	Brass
Piston clamping unit material	POM
Material piston end-position locking	High-alloy steel
Material piston	Wrought aluminium alloy
Material piston rod	High-alloy stainless steel, hard chrome-plated, High-alloy steel, High-alloy stainless steel
Material piston rod wiper	FPM, HNBR, PE, TPE-U(PU)
Buffer seal material	FPM, TPE-U(PU)
Material of cushioning boss	Aluminium, POM
Material cylinder barrel	Smooth-anodised wrought aluminium alloy
Material nut	Galvanised steel
Material rod wiper	Brass, PTFE reinforced, TPE-E
Material bearing	Bronze, Metal polymer compound, POM
Material collar screws	Galvanised steel
Material bellows	NBR, PA