ISO cylinder-DNCI-63- -
Demander un devis
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | DNCI |
| Cycle de vie | active |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand DNCI-63- - peut-il être expédié ?
DNCI-63- - est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer DNCI-63- - en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour DNCI-63- - et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour DNCI-63- -, selon la disponibilité et la destination.
Standards-based cylinder to ISO 15552 , With integrated displacement encoder for relative analogue, contactless measurement , Suitable for servo-pneumatic applications with axis controller CPX-CMAX, end-position controller CPX-CMPX or SPC11 and measuring module CPX-CMIX , Piston rod with male thread , Piston rod variants , With optional recirculating ball bearing guide, clamping unit
Caractéristiques
Specifications
| Stroke | 10, 2000 mm |
| Stroke Servopneumatic positioning | 100, 500 mm |
| Stroke Smart Softstop | 100, 500 mm |
| Stroke reduction at end positions | >= 15 mm |
| Smallest positioning stroke | 3% of max. stroke, Max. 20 mm |
| Piston diameter | 63 mm |
| Based on standard | ISO 15552 (previously also VDMA 24562, ISO 6431, NF E49 003.1, UNI 10290) |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Positioning installation position | optional |
| Soft Stop installation position | Optional |
| Functional principle of measuring system | Digital |
| Design | Piston, Piston rod, Profile barrel |
| Position detection | Via proximity switch, With integrated displacement encoder |
| Variants | Extended piston rod, Piston rod at one end |
| Protection against torque/guide | Dual flat piston rod |
| Operating pressure | 174 psi |
| Operating pressure positioning/Soft Stop | 4, 8 bar |
| Max. travel speed | 1.5 m/s |
| Min. travel speed | 0.05 m/s |
| Typical positioning time short stroke, horizontal | 0.4/0.55 s |
| Typical positioning time long stroke, horizontal | 0.55/0.75 s |
| Mode of operation | Double-acting |
| Nominal operating voltage DC | 5 V |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC, To UK RoHS instructions |
| Operating medium | Compressed air to ISO 8573-1:2010 [6:4:4] |
| Note on operating and pilot medium | Dew point at least 10 °C below the ambient temperature and temperature of the medium |
| Continuous shock resistance to DIN/IEC 68 Part 2-82 | Tested to severity level 2 |
| Corrosion resistance class CRC | 1 - Low corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Max. magnetic interference field | 10 KA/m at a distance of 100 mm |
| Degree of protection | IP65, To IEC 60529 |
| Vibration resistance to DIN/IEC 68 Part 2-6 | Tested to severity level 2 |
| Ambient temperature | -20, 80 °C |
| Impact energy in end positions | 1.3 J |
| Max. torque for protection against torsion | 0.05 Nm |
| Max. working load, horizontal | 180 kg |
| Max. working load, vertical | 60 kg |
| Min. working load, horizontal | 12 kg |
| Min. working load, vertical | 12 kg |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 1682 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 1682, 1870 N |
| Moving mass for 0 mm stroke | 383 g |
| Additional moving mass per 10 mm stroke | 23 g |
| Basic weight for 0 mm stroke | 1914 g |
| Additional weight per 10 mm stroke | 71 g |
| Output signal | Analogue |
| Repetition accuracy in ± mm | 0.5 mm |
| Max. controllable force during advance stroke | 1683 N |
| Max. controllable force during return stroke | 1514 N |
| Typical friction force | 75 N |
| Repetition accuracy Soft Stop intermediate position | +/-2 mm |
| Electrical connection encoder | 8-pin |
| Cable length | 1.5 m |
| Type of mounting | With accessories |
| Pneumatic connection | G3/8 |
| Note on materials | RoHS-compliant |
| Material cover | Wrought aluminium alloy |
| Material seals | NBR, TPE-U(PU) |
| Material cable sheath | TPE-U(PUR) |
| Material piston rod | High-alloy steel |
| Material screws | Steel |
| Material sensor cover | Aluminium |
| Material sensor head | POM |
| Material connector housing | PBT |
| Material cylinder barrel | Wrought aluminium alloy |
Plus de pièces Festo
OccasionFesto 560207 - HGPT-25-A-B-F Used
Disponible sur demandePush-in connector-NPQP-D-Q6-S8-FD-P10
Disponible sur demandePush-in T-fitting-NPQE-LT-R18-Q4-P10