B&R X67BC8513.L12

Name: B&R X67BC8513.L12
Brand: B&R
SKU: X67BC8513.L12

Référence: X67BC8513.L12 · Marque: B&R

Prix sur demande

Demander un devis

Garantie de 12 mois (neuf) · 3 mois (occasion/reconditionné)

Retours sous 30 jours, sans frais de réapprovisionnement sur les pièces non utilisées

Expédié via

En bref

Disponibilité	Confirmation sur demande
Catégorie	Bus controller modules
Cycle de vie	active
Garantie	12 mois (neuf) · 3 mois (occasion/reconditionné)
Poids	360 kg

Livraison & disponibilité

Quand X67BC8513.L12 peut-il être expédié ?

X67BC8513.L12 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.

Puis-je récupérer X67BC8513.L12 en personne ?

Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.

La livraison express est-elle disponible ?

Oui — mentionnez-le lors de votre demande de devis pour X67BC8513.L12 et nous inclurons les options de livraison express dans notre réponse.

Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?

En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour X67BC8513.L12, selon la disponibilité et la destination.

POWERLINK V1/V2Integrated hub for efficient cabling12 digital channels, configurable as inputs or outputs1 analog input, 0 to 20 mA, 12 bitsM12 connectionsI/O configuration and firmware update via the fieldbusIntegrated connection to the local expansion via X2X Link for up to 250 additional modulesConfigurable I/O cycle (starting at 200 µs) The bus controller makes it possible to connect X2X Link I/O nodes to POWERLINK. It is also possible to operate the X2X Link cycle synchronously 1:1 or synchronous to POWERLINK using a prescaler. Additional X2X Link I/O nodes (X67 modules or other modules based on X2X Link) can be connected using the integrated X2X Link connection. Mechanically, POWERLINK is connected via an IP67-rated standard D-coded M12 Ethernet connector.POWERLINK is a standard protocol for Fast Ethernet equipped with hard real-time characteristics. The POWERLINK Standardization Group (EPSG) ensures that the standard remains open and is continually developed:: www.ethernet-powerlink.org.

Caractéristiques

Specifications

Bus controller	0xB3AC
Inputs/Outputs	8x M12, A-coded
Insulation voltage between channel and bus	500 Veff
Nominal voltage	24 VDC
Internal I/O module	0xB3CD
Sensor/Actuator power supply	Max. 12 W
Status indicators	I/O function per channel, supply voltage, bus function
Outputs	Yes, using LED status indicator and software
I/O power supply	M8, 4-pin
Dynamic node allocation (DNA)	Yes
Fieldbus	200 μs
X2X Link	200 μs
Power output	15 W X2X Link power supply for I/O modules
Internal I/O	0.6 W
X2X Link power supply	17.25 W at maximum power output for connected I/O modules
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
ATEX	Zone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 - Max. 60°C TÜV 05 ATEX 7201X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
KC	Yes
Type	Type 2
Variant	Current-sourcing FET
Line length	Max. 100 m between 2 stations (segment length)
Transfer rate	100 Mbit/s
Physical layer	100BASE-TX
Half-duplex	Yes
Full-duplex	No
Autonegotiation	Yes
Auto-MDI/MDIX	Yes
Hub propagation delay	0.96 to 1 µs
Synchronization between bus systems possible	Yes
Voltage range	18 to 30 VDC
Integrated protective function	Reverse polarity protection
Voltage	I/O power supply minus voltage drop for short-circuit protection
Voltage drop for short-circuit protection at 0.5 A	Max. 2 VDC
Summation current	Max. 0.5 A
Short-circuit proof	Yes
Input characteristics per EN 61131-2	Type 1
Input voltage	18 to 30 VDC
Input current at 24 VDC	Typ. 4 mA
Input circuit	Sink
Hardware	≤10 μs (channels 1 to 4) / ≤70 µs (channels 5 to 12)
Software	Default 0 ms, configurable between 0 and 25 ms in 0.2 ms intervals
Input resistance	Typ. 6 kΩ
Additional functions	50 kHz event counting, gate measurement
Low	<5 VDC
High	>15 VDC
Quantity	1
Signal form	Square wave pulse
Evaluation	Positive edge - Negative edge
Input frequency	Max. 50 kHz
Counter 1	Input 1
Counter frequency	Max. 50 kHz
Counter size	16-bit
Internal	48 MHz, 3 MHz, 187.5 kHz
Length of pause between pulses	≥100 µs
Pulse length	≥20 µs
Supported inputs	Input 2
Input	0 to 20 mA
Input type	Differential input
Digital converter resolution	12-bit
Conversion time	200 µs
Output format	INT
Current	0x0000 - 0x7FFF / 1 LSB = 0x0008 = 4.883 μA
Load	<300 Ω
Input protection	Protection against wiring with supply voltage
Permissible input signal	Max. ±30 mA
Undershoot	0x0000
Overshoot	0x7FFF
Conversion procedure	Successive approximation
Gain	0.1%
Offset	0.05%
Max. gain drift	0.013 %/°C
Max. offset drift	0.02 %/°C
DC	>50 dB
50 Hz	>50 dB
Common-mode range	±2 V
Crosstalk between channels	>70 dB
Nonlinearity	<0.1%
Insulation voltage between input and bus	500 Veff
Voltage drop at 20 mA	Typ. 4.5 V
Cutoff frequency	1 kHz
Slope	40 dB
Switching voltage	I/O power supply minus residual voltage
Nominal output current	0.5 A
Total nominal current	8 A
Output circuit	Source
Output protection	Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply
Diagnostic status	Output monitoring with 10 ms delay
Leakage current when the output is switched off	5 µA
Switching on after overload shutdown	Approx. 10 ms (depends on the module temperature)
RDS(on)	150 mΩ
Residual voltage	<0.3 V at 0.5 A nominal current
Peak short-circuit current	<12 A
0 → 1	<400 µs
1 → 0	<400 µs
Resistive load	Max. 100 Hz
Inductive load	See section "Switching inductive loads".
Braking voltage when switching off inductive loads	50 VDC
Electrical isolation	Bus isolated from POWERLINK and channel Channel not isolated from channel
Any	Yes
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP67
Operation	-25 to 60°C
Derating	-
Storage	-40 to 85°C
Transport	-40 to 85°C
Width	53 mm
Height	155 mm
Depth	42 mm
Weight	360 g
M8	Max. 0.4 Nm
M12	Max. 0.6 Nm