B&R X20CM8281

Name: B&R X20CM8281
Brand: B&R
SKU: X20CM8281

Référence: X20CM8281 · Marque: B&R

Prix sur demande

Demander un devis

Garantie de 12 mois (neuf) · 3 mois (occasion/reconditionné)

Retours sous 30 jours, sans frais de réapprovisionnement sur les pièces non utilisées

Expédié via

En bref

Disponibilité	Confirmation sur demande
Catégorie	Other functions
Cycle de vie	active
Garantie	12 mois (neuf) · 3 mois (occasion/reconditionné)

Livraison & disponibilité

Quand X20CM8281 peut-il être expédié ?

X20CM8281 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.

Puis-je récupérer X20CM8281 en personne ?

Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.

La livraison express est-elle disponible ?

Oui — mentionnez-le lors de votre demande de devis pour X20CM8281 et nous inclurons les options de livraison express dans notre réponse.

Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?

En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour X20CM8281, selon la disponibilité et la destination.

Digital and analog channelsSelectable current and voltage for AI and AOCounter functions The module is a universal mixed module. On this module, digital I/O and analog I/O are combined. A current or voltage signal can be used for the analog I/O as desired. Counter functions on two of the digital inputs expand the range of use.

Caractéristiques

Specifications

I/O module	4 digital inputs, 2 digital outputs, 1 analog input, 1 analog output, special functions
B&R ID code	0x24C3
Status indicators	I/O function per channel, operating state, module status
Module run/error	Yes, using LED status indicator and software
Analog inputs	Yes, using LED status indicator and software
Digital outputs	Yes, using LED status indicator and software (output error status)
Bus	0.01 W
Internal I/O	1.75 W
Additional power dissipation caused by actuators (resistive) [W]	-
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
DNV	Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck)
CCS	Yes
LR	ENV1
KR	Yes
ABS	Yes
BV	EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck
KC	Yes
Quantity	1
Nominal voltage	24 VDC
Input characteristics per EN 61131-2	Type 1
Input voltage	24 VDC -15% / +20%
Input current at 24 VDC	Typ. 3.3 mA
Input circuit	Sink
Hardware	≤2 µs
Software	Default 1 ms, configurable between 0 and 25 ms in 0.2 ms increments
Connection type	1-wire connections
Input resistance	Typ. 7.18 kΩ
Additional functions	20 kHz event counting, gate measurement
Low	<5 VDC
High	>15 VDC
Insulation voltage between channel and bus	500 Veff
Signal form	Square wave pulse
Evaluation	Positive edge - Negative edge
Input frequency	Max. 20 kHz
Counter 1	Input 1
Counter 2	Input 3
Counter frequency	Max. 20 kHz
Counter size	16-bit
Internal	48 MHz, 24 MHz, 12 MHz, 6 MHz, 3 MHz, 1.5 MHz, 750 kHz, 375 kHz, 187.5 kHz
Length of pause between pulses	≥100 µs
Pulse length	≥20 µs
Supported inputs	Input 4
Input	±10 V or 0 to 20 mA / 4 to 20 mA, via different terminal connections
Input type	Single-ended
Voltage	Max. 0.02%, from 10 MΩ → 1 kΩ, resistive
Current	Max. 0.5%, from 1 Ω → 400 Ω, resistive
Conversion time	300 µs, conversion runs asynchronous to the X2X Link cycle
Output format	INT
Input protection	Protection against wiring with supply voltage
Conversion procedure	Successive approximation
Input filter	Second-order low-pass filter / Cutoff frequency 1 kHz
Gain	0.05%
Offset	0.125%
Variant	Current-sourcing FET
Switching voltage	24 VDC -15% / +20%
Nominal output current	0.5 A
Total nominal current	1 A
Output circuit	Source
Output protection	Short-circuit proof
Diagnostic status	Output monitoring with 10 ms delay
Leakage current when the output is switched off	5 µA
RDS(on)	105 mΩ
Peak short-circuit current	<14 A
Switch-on in the event of overload shutdown or short-circuit shutdown	Approx. 10 ms (depends on the module temperature)
0 → 1	<250 µs
1 → 0	<270 µs
Resistive load	Max. 100 Hz
Inductive load	See section "Switching inductive loads".
Braking voltage when switching off inductive loads	Typ. 50 VDC
Output	±10 V or 0 to 20 mA, via different terminal connections
Digital converter resolution	12-bit
Settling time on output change over entire range	1 ms
Switch on/off behavior	Internal enable relay for startup and errors
Nonlinearity	<0.1%
Electrical isolation	Channel isolated from bus Channel not isolated from channel
Horizontal	Yes
Vertical	Yes
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	See section "Derating".
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing
Operation	5 to 95%, non-condensing
Note	Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately.
Pitch	12.5+0.2 mm