Pièces Wago

Operating tool; Blades: 3.5 x 0.5 mm and 2.5 x 0.4 mm; for TOPJOB®S installation terminal blocks

Stepper Controller; RS-422/24 VDC; 20 mA

3-way distribution connector; 3-pole; Cod. A; 1 input; 3 outputs; white

SMD PCB terminal block; push-button; 1.5 mm²; Pin spacing 6 mm; 3-pole; Push-in CAGE CLAMP®; in tape-and-reel packaging; white

PUSH WIRE® splicing connector; for solid conductors; Alu-Plus contact paste; max. 2.5 mm²; 4-conductor; transparent housing; red cover; Surrounding air temperature: max 60°C (T60); 2,50 mm²;

Snap-in socket; 2-pole; Cod. B; 1,50 mm²; gray

8-channel digital output; 24 VDC; 0.5 A; Low-side switching

2-channel digital output; 24 VDC; 0.5 A

2-conductor fuse holder ; for Class CC cylindrical fuses; 3-pole; without blown fuse indication; for DIN-rail 35 x 15 and 35 x 7.5; 16 mm²; CAGE CLAMP®; light gray

Socket module; without ground contact; 1-pole; 1,00 mm²; gray

Power Supply; 24 VDC; fuse holder

Pre-assembled interconnecting cable; Eca; Socket/plug; 3-pole; Cod. A; H05VV-F 3G 2.5 mm²; 5 m; 2,50 mm²; black

Plug; with strain relief housing; 5-pole; 1,50 mm²; black

Electronic circuit breaker; 1-channel; 24 VDC input voltage; 4 A; Signal contact

Relay module; Nominal input voltage: 24 V AC/DC; 2 changeover contacts; Limiting continuous current: 6 A; Module width: 23 mm; 2,50 mm²; gray

Industrial-ECO-Switch; 16 Ports 1000Base-T; Extended temperature range; black metallic

Switched-mode power supply; for DALI module (753-647); 1-phase; 18 VDC output voltage; 1.1 A output current; 2,50 mm²

1-conductor female connector, 2-row; CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 6-pole; 100% protected against mismating; Levers; 1,50 mm²; black

1-conductor female connector; CAGE CLAMP®; 0.5 mm²; Pin spacing 2.5 mm; 12-pole; 100% protected against mismating; 0,50 mm²; light gray

Pre-assembled interconnecting cable; Dca; Socket/plug; 5-pole; Cod. I; H05Z1Z1-F 5G 1.5 mm²; 3 m; 1,50 mm²; blue

Stepper Controller; 24 VDC; 1.5 A

Incremental encoder interface; 5 … 24 VDC

Plug for PCBs; angled; 3-pole; Cod. A; black

2-conductor miniature through terminal block; 2.5 mm²; with test option; suitable for Ex e II applications; center marking; for DIN-15 rail; CAGE CLAMP®; 2,50 mm²; light gray