Pièces Wago

Strain relief housing; 3-pole; with locking clip; for 1 cable; 7.0 … 11.5 mm; 48 mm; white

Separator plate; 2.5 mm thick; oversized; orange

Separator plate; 2 mm thick; oversized; orange

Strain relief housing; for female and male connectors; 2 parts; Pin spacing 5.08 mm; 8-pole; orange

Jumper; from 1 to 4; insulated; light gray

End plate; snap-fit type; 1 mm thick; orange

Coding key; to be snapped above bottom level; light gray

Separator plate; 2 mm thick; oversized; orange

End and intermediate plate; 1 mm thick; for quadruple-deck terminal blocks; gray

Marking strips; for Smart Printer; permanent adhesive; 22.6 mm; white

THT pin strip; Pin spacing 3.5 mm; 4-pole; black

Board-to-Board Link; Pin spacing 6 mm; 2-pole; Length: 34 mm; white

Marker; for TP printers; for use in nozzles; Length: 23 mm; white

Conductor markers for thread-on mounting; for Smart Printer; 5 x 10.5 mm; yellow

Mounting carrier; for 3-conductor terminal blocks; 221 Series - 4 mm²; with snap-in mounting foot for horizontal mounting; white

Phillips screw 2.9 x 13

Marking strips; on reel; 3 mm wide; plain; Self-adhesive; white

End and intermediate plate; 2.5 mm thick; gray

DALI-Sensor; IS3360 MX Highbay DALI 2

End and intermediate plate; 1 mm thick; gray

Seperator plate with jumper bar recess; 2 mm thick; 102.3 mm wide; gray

Mounting carrier with strain relief; for 10-wire connectors; 221 Series - 4 mm²; for DIN-35 rail; blue

Strain relief housing; for female and male connectors; 2 parts; Pin spacing 3.5 mm; 7-pole; light gray

Jumper; 2-way; unplated; silver-colored