Sick MAX30N-72C11CA0200
Solicitar presupuesto
Datos rápidos
| Disponibilidad | Confirmación bajo consulta |
| Categoría | MAX |
| Ciclo de vida | active |
| Garantía | 12 meses (nuevo) · 3 meses (usado/reacondicionado) |
Envío y disponibilidad
¿Cuándo se puede enviar MAX30N-72C11CA0200?
MAX30N-72C11CA0200 se abastece bajo pedido — solicite un presupuesto y confirmaremos la disponibilidad exacta y el plazo de entrega para esta unidad concreta.
¿Puedo recoger MAX30N-72C11CA0200 en persona?
Es posible recoger el pedido en nuestro almacén de Groningen, Países Bajos — contáctenos antes de realizar el pedido para confirmar disponibilidad y acordar un horario de recogida.
¿Está disponible el envío exprés?
Sí — menciónelo al solicitar un presupuesto para MAX30N-72C11CA0200 e incluiremos las opciones de envío exprés en nuestra respuesta.
Nuestra planta está parada y lo necesitamos urgentemente — ¿pueden ayudar?
Ante una avería crítica, contáctenos directamente al +31 (0)50-7110348 o a sales@partnerplc.com — estudiaremos un envío urgente el mismo día o un transporte dedicado para MAX30N-72C11CA0200, según disponibilidad y destino.
Linear encoders | MAX | MAX30N-72C11CA0200 | Type: Ø 30 mm 31f7 for IN cylinder mounting – cylinder bore hole 31H8 | Cable connection direction: Radial | Pipe diameter / Damping zone / End cap: 30 mm / Flat | Supply voltage: 24 V DC (8 ... 32 V DC) | Communication interface: CANopen | Connection type: Male connector, M12 type S (20x20 mm), 5-pin | Measuring range: 0 mm ... 200 mm
Especificaciones
Features
| Items supplied | Accessories not included with delivery, please order separately. |
Safety-related parameters
| MTTFD (mean time to dangerous failure) | 69Â years (ENÂ ISOÂ 13849-1)Â 1) |
Performance
| Pressure pipe/End cap | Flat |
| Connection type | Male connector, M12 type S (20x20Â mm), 5-pin |
| Direction of connection | Radial |
| Measured values | Positioning, speed |
| Position (F.S.) | 0 mm ... 200 mm 1) |
| Speed | 0 ⦠1,000 mm/s |
| Null zone | 21.5 mm |
| Damping zone | 30Â mm |
| Fluid temperature | â30 °C ... +95 °C 2) |
| Air humidity | 90Â % (Condensation not permitted) |
| Operating pressure PN | 320Â bar |
| Supply voltage | 24Â VÂ DC (8Â ... 32Â VÂ DC) |
| Switch-on time | <Â 250Â ms |
| Switch-on current | 5,0 A/ 50 µs |
| Measuring frequency (internal) | 2Â ms |
| Transmission rate (cycle time) | CANopen (0Â ... 65,535Â ms), factory setting: 0Â ms (transmission stopped) |
| Setpoint tolerance | ⤠± 1 mm |
| Hysteresis | ± 0,1 mm |
| Repeatability | Typ. ± 0.2 mm |
Interfaces
| Communication interface | CANopen |
| Bus protocol | CANopen CiA DS-301 |
| Device profile | CANopen CiA DS-406 |
| Baud rate | 250Â kbit/s |
| Node ID | 11 |
Electronics
| Connection type | Male connector, M12 type S (20x20Â mm), 5-pin |
| PIN assignment | 1=n.c.; 2=VÂ DC; 3=GND; 4=CAN_H; 5=CAN_L |
| Supply voltage | 24Â VÂ DC (8Â ... 32Â VÂ DC) |
| Residual ripple | < 1% S-S |
| Power consumption | â¤Â 0.75 W |
| Current consumption | â¤Â 30 mA |
| Bus termination (external) | 120 Ω |
| Overvoltage protection during power-up (60 s) | â¤Â 36 V at all poles during power-up (60 s)â¤Â 48 V To GND during power-up (60 s) |
| Reverse polarity protection | â¤Â 36 V (at all poles) (ISO 16750-2) |
| Insulation resistance | Riso â¥Â 10 MΩ (ISO 16750-2) |
| Dielectric strength | 500 V DC, 0 V DC (60 s) to housing (RISO â¥Â 1 MΩ) |
| Short-circuit protection | VS â GND on housing |
Mechanics
| Housing | ÃÂ 30Â mm, 31f7 for IN cylinder mounting â cylinder bore hole 31H8 |
| M12 flange | M12 flange type S: DM 20x20Â mm - hole pattern 14Â mm (ENÂ 61076-2-101) |
| Wire length | 60Â mm |
| Housing | Stainless steel 1.4305Â (AISI 303) |
| Pressure pipe | Stainless steel 1.4404, AISI 316L |
| O-ring | NBR 70 |
| Support ring | PTFE |
| M12 male connector | Glass fiber reinforced polyamide, nickel-/gold-plated brass contacts |
| M12 flange | Nickel-plated brass with O-ring (NBR) |
| Strands | PVC |
Ambient data
| EMC | EU Directive 2014/30Â /Â EU CE marking |
| ESD (air and contact discharge) | ISOÂ 61000-4-2: 2009Â / ISOÂ 10605: 2008 |
| Sine | 15Â g, 24Â h / axis, 55Â ... 2.000Â Hz (IECÂ 60068-2-6) |
| Sine over noise | 13Â g (r.m.s), 36Â h / axis, 10Â ... 2.000Â Hz (IECÂ 60068-2-80) |
| Broadband noise (resonance peaks removed) | 15Â g (r.m.s), 48Â h / axis, 10Â ... 2.000Â Hz (IECÂ 60068-2-64) |
| Operating pressure PN | 320Â bar |
| Overload pressure Pmax = PN x 1.2 | 380 bar |
| Test pressure Pstat = PN x 1.5 | 480 bar |
| Storage | â20 °C ... +65 °C 1) |
| Operation (electronics) | â40 °C ... +105 °C 2) |
| Maximum air humidity | 90Â % (Condensation not permitted) |
| M12 male connector | IP69K |
Classifications
| ECLASS 5.0 | 27270705 |
| ECLASS 5.1.4 | 27270705 |
| ECLASS 6.0 | 27270705 |
| ECLASS 6.2 | 27270705 |
| ECLASS 7.0 | 27270705 |
| ECLASS 8.0 | 27270705 |
| ECLASS 8.1 | 27270705 |
| ECLASS 9.0 | 27270705 |
| ECLASS 10.0 | 27270705 |
| ECLASS 11.0 | 27270705 |
| ECLASS 12.0 | 27274304 |
| ETIM 5.0 | EC002544 |
| ETIM 6.0 | EC002544 |
| ETIM 7.0 | EC002544 |
| ETIM 8.0 | EC002544 |
| UNSPSC 16.0901 | 41111613 |
Certificates
| EU declaration of conformity | â |
| UK declaration of conformity | â |
| ACMA declaration of conformity | â |
| Moroccan declaration of conformity | â |
| China RoHS | â |
| Information according to Art. 3 of Data Act (Regulation EU 2023/2854) | â |
