Disponible bajo consulta
IFM SM6420
Referencia: SM6420 · Marca: IFM
Precio bajo consulta
Solicitar presupuesto
Garantía de 12 meses (nuevo) · 3 meses (usado/reacondicionado)
Devoluciones en 30 días, sin comisión de reposición en piezas sin usar
Envío mediante
Datos rápidos
| Disponibilidad | Confirmación bajo consulta |
| Categoría | Magnetic-inductive volumetric flow meters |
| Garantía | 12 meses (nuevo) · 3 meses (usado/reacondicionado) |
Envío y disponibilidad
¿Cuándo se puede enviar SM6420?
SM6420 se abastece bajo pedido — solicite un presupuesto y confirmaremos la disponibilidad exacta y el plazo de entrega para esta unidad concreta.
¿Puedo recoger SM6420 en persona?
Es posible recoger el pedido en nuestro almacén de Groningen, Países Bajos — contáctenos antes de realizar el pedido para confirmar disponibilidad y acordar un horario de recogida.
¿Está disponible el envío exprés?
Sí — menciónelo al solicitar un presupuesto para SM6420 e incluiremos las opciones de envío exprés en nuestra respuesta.
Nuestra planta está parada y lo necesitamos urgentemente — ¿pueden ayudar?
Ante una avería crítica, contáctenos directamente al +31 (0)50-7110348 o a sales@partnerplc.com — estudiaremos un envío urgente el mismo día o un transporte dedicado para SM6420, según disponibilidad y destino.
Precise measurement of flow, consumption and medium temperature High accuracy, repeatability and measurement dynamics With switching output, analogue output and pulse output Clearly readable colour display with red/green colour change No inlet and output pipe lengths required Convenient operation via buttons or parameter setting via IO-Link
Especificaciones
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Measuring range | 0.05...35 l/min; 0.003...2.1 m³/h; 0.6...555 gph; 0.01...9.25 gpm |
| 0.05...35 l/min | 0.003...2.1 m³/h |
| Process connection | threaded connection Rc 1/2 internal thread DN15 |
Application
| Special feature | Gold-plated contacts |
| Media | conductive liquids; water; hydrous media |
| Note on media | conductivity: ≥ 20 µS/cm; viscosity: < 70 mm²/s (40 °C) |
| Medium temperature[°C] [°C] | -20...90 |
| Pressure rating | 16 bar; 1.6 MPa |
| 16 bar | 1.6 MPa |
Electrical data
| Operating voltage[V] [V] | 18...30 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 80 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | 5 |
| Measuring principle | magnetic-inductive |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
Inputs
| Inputs | counter reset |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; pulse signal; IO-Link; frequency signal; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Number of analogue outputs | 1 |
| Analogue current output[mA] [mA] | 4...20; (scalable) |
| Max. load[Ω] [Ω] | 500 |
| Pulse output | flow rate meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Measuring range | 0.05...35 l/min; 0.003...2.1 m³/h; 0.6...555 gph; 0.01...9.25 gpm |
| 0.05...35 l/min | 0.003...2.1 m³/h |
| Display range | -42...42 l/min; -2.5...2.5 m³/h; -666...666 gph; -11.1...11.1 gpm |
| -42...42 l/min | -2.5...2.5 m³/h |
| Resolution | 0.02 l/min; 0.002 m³/h; 0.6 gph; 0.01 gpm |
| 0.02 l/min | 0.002 m³/h |
| Set point SP | 0.25...35 l/min; 0.015...2.1 m³/h; 4.2...555 gph; 0.07...9.25 gpm |
| 0.25...35 l/min | 0.015...2.1 m³/h |
| Reset point rP | 0...34.8 l/min; 0...2.08 m³/h; 1.2...552 gph; 0.02...9.2 gpm |
| 0...34.8 l/min | 0...2.08 m³/h |
| Analogue start point ASP | 0...28 l/min; 0...1.7 m³/h; 0...666 gph; 0...7.4 gpm |
| 0...28 l/min | 0...1.7 m³/h |
| Analogue end point AEP | 7...35 l/min; 0.42...2.1 m³/h; 111...555 gph; 1.85...9.25 gpm |
| 7...35 l/min | 0.42...2.1 m³/h |
| Low flow cut-off LFC | 0.05...1.75 l/min; 0.003...0.1 m³/h; 0.6...27.6 gph; 0.01...0.46 gpm |
| 0.05...1.75 l/min | 0.003...0.1 m³/h |
| Frequency end point, FEP | 7...35 l/min; 0.42...2.1 m³/h; 111.6...555 gph; 1.86...9.25 gpm |
| Frequency at the end point FRP[Hz] [Hz] | 1...10000 |
| Pulse length[s] [s] | 0.001...2 |
| Pulse value | 0.001...99990000 I |
| Measuring range[°C] [°C] | -20...90 |
| Display range[°C] [°C] | -42...112 |
| Resolution[°C] [°C] | 0.1 |
| Set point SP[°C] [°C] | -19.6...90 |
| Reset point rP[°C] [°C] | -20...89.6 |
| Analogue start point[°C] [°C] | -20...68 |
| Analogue end point[°C] [°C] | 2...90 |
| In steps of[°C] [°C] | 0.1 |
Accuracy / deviations
| Accuracy (in the measuring range) | ± (0,8 % MW + 0,2 % MEW) |
| Repeatability | ± 0,2 % MEW |
| Accuracy[K] [K] | ± 2,5 (Q > 5 % MEW) |
Response times
| Start-up delay[s] [s] | 0...50 |
| Response time[s] [s] | 15; (Q > 10 % MEW, T09) |
| Damping process value dAP[s] [s] | 0...5 |
Software / programming
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; frequency output; current/pulse output; start-up delay; display can be deactivated; Display unit |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Common - I&D; Identification and Diagnosis; Function; Measurement data, standard resolution |
| Common - I&D | Identification and Diagnosis |
| Function | Measurement data, standard resolution |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 3 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 8 |
| Supported DeviceIDs | default; 954 |
| default | 954 |
Operating conditions
| Ambient temperature[°C] [°C] | -20...60 |
| Storage temperature[°C] [°C] | -25...80 |
| Protection | IP 65; IP 67 |
Tests / approvals
| EMC | DIN EN 60947-5-9 |
| CPA approval | model number; 005MI; accuracy class; -; maximum allowable error; ± 1,0 % FS; Q (min); 0,003 m³/h; Q (t); -; Q (max); 2,1 m³/h |
| model number | 005MI |
| accuracy class | - |
| maximum allowable error | ± 1,0 % FS |
| Q (min) | 0,003 m³/h |
| Q (t) | - |
| Q (max) | 2,1 m³/h |
| Shock resistance | DIN IEC 68-2-27; 20 g (11 ms) |
| DIN IEC 68-2-27 | 20 g (11 ms) |
| Vibration resistance | DIN IEC 68-2-6:; 5 g (10...2000 Hz) |
| DIN IEC 68-2-6: | 5 g (10...2000 Hz) |
| MTTF[years] [years] | 114 |
| UL approval | UL approval no.; I014; File number UL; E174189 |
| UL approval no. | I014 |
| File number UL | E174189 |
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight[g] [g] | 741.9 |
| Housing | rectangular |
| Dimensions[mm] [mm] | 110 x 48 x 73 |
| Materials | stainless steel (316/1.4408); stainless steel (316L/1.4404); PC; PBT+PC-GF30 |
| Materials (wetted parts) | stainless steel (316L/1.4404); PEEK; carbon fibre PEEK; FKM |
| Process connection | threaded connection Rc 1/2 internal thread DN15 |
Displays / operating elements
| Display | colour display 1,44", 128 x 128 pixels; 2 x LED, yellow |
Remarks
| Remarks | MW = measured value; MEW = Final value of the measuring range |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
Garantía de 12 mesesen todos los artículos nuevos
Garantía de 3 mesesen piezas usadas y reacondicionadas
Devoluciones en 30 díassin comisión de reposición en piezas sin usar
Envío mundialEntrega rápida y con seguimiento en todo el mundo
