Pressure regulator-MS4-LR
Solicitar presupuesto
Datos rápidos
| Disponibilidad | Confirmación bajo consulta |
| Categoría | MS4-LR |
| Ciclo de vida | active |
| Garantía | 12 meses (nuevo) · 3 meses (usado/reacondicionado) |
Envío y disponibilidad
¿Cuándo se puede enviar MS4-LR?
MS4-LR se abastece bajo pedido — solicite un presupuesto y confirmaremos la disponibilidad exacta y el plazo de entrega para esta unidad concreta.
¿Puedo recoger MS4-LR en persona?
Es posible recoger el pedido en nuestro almacén de Groningen, Países Bajos — contáctenos antes de realizar el pedido para confirmar disponibilidad y acordar un horario de recogida.
¿Está disponible el envío exprés?
Sí — menciónelo al solicitar un presupuesto para MS4-LR e incluiremos las opciones de envío exprés en nuestra respuesta.
Nuestra planta está parada y lo necesitamos urgentemente — ¿pueden ayudar?
Ante una avería crítica, contáctenos directamente al +31 (0)50-7110348 o a sales@partnerplc.com — estudiaremos un envío urgente el mismo día o un transporte dedicado para MS4-LR, según disponibilidad y destino.
Grid dimension 40mm , High flow rate performance with minimal pressure drop , Good control characteristics with minimal pressure hysteresis and primary pressure compensation , With or without secondary exhausting , Lockable rotary knob , Optional pressure sensor and rotary knob pressure gauge , Sustainable operation thanks to reduced pressure level
Especificaciones
Specifications
| Size | 4 |
| Series | MS |
| Actuator lock | Rotary knob with detent, Rotary knob with integrated lock, can be closed with accessories |
| Mounting position | optional |
| Design | Pressure regulator with pressure gauge |
| Controller function | Output pressure constant, With secondary venting, With return flow function |
| Pressure gauge (ANALOG) or Pressure display (DIGITAL) | Prepared for G1/4, Prepared for G1/8, Via pressure sensor, With pressure gauge |
| Operating pressure | 0.8, 14 bar |
| Pressure regulation range | 0.3, 12 bar |
| Max. pressure hysteresis | 3.625 psi |
| Standard nominal flow rate (standardised to DIN 1343) | 1000, 2200 l/min |
| Approval | c UL us - Recognized (OL) |
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) |
| UKCA marking (see declaration of conformity) | To UK EX instructions |
| Explosion protection certification outside the EU | EPL Db (GB), EPL Gb (GB) |
| Explosion protection | Zone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T60°C Db X |
| Explosion ambient temperature | -10 °C <= Ta <= +60 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4], Inert gases |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Storage temperature | -10, 60 °C |
| Suitable for use with food | See supplementary material information |
| Media temperature | -10, 60 °C |
| Ambient temperature | -10, 60 °C |
| Product weight | 225 g |
| Type of mounting | Front panel mounting, In-line installation, With accessories |
| Note on materials | RoHS-compliant |
| Material sub-base | Die-cast aluminium |
| Material seals | NBR |
| Material housing | Die-cast aluminium |
| Material membrane | NBR |
Más piezas Festo
Disponible bajo consultaPush-in connector-NPQP-D-Q6-S8-FD-P10
Disponible bajo consultaPush-in T-fitting-NPQE-LT-R18-Q4-P10