B&R X20AI2437

Name: B&R X20AI2437
Brand: B&R
SKU: X20AI2437

Referencia: X20AI2437 · Marca: B&R

Precio bajo consulta

Solicitar presupuesto

Garantía de 12 meses (nuevo) · 3 meses (usado/reacondicionado)

Devoluciones en 30 días, sin comisión de reposición en piezas sin usar

Envío mediante

Datos rápidos

Disponibilidad	Confirmación bajo consulta
Categoría	Analog inputs
Ciclo de vida	active
Garantía	12 meses (nuevo) · 3 meses (usado/reacondicionado)

Envío y disponibilidad

¿Cuándo se puede enviar X20AI2437?

X20AI2437 se abastece bajo pedido — solicite un presupuesto y confirmaremos la disponibilidad exacta y el plazo de entrega para esta unidad concreta.

¿Puedo recoger X20AI2437 en persona?

Es posible recoger el pedido en nuestro almacén de Groningen, Países Bajos — contáctenos antes de realizar el pedido para confirmar disponibilidad y acordar un horario de recogida.

¿Está disponible el envío exprés?

Sí — menciónelo al solicitar un presupuesto para X20AI2437 e incluiremos las opciones de envío exprés en nuestra respuesta.

Nuestra planta está parada y lo necesitamos urgentemente — ¿pueden ayudar?

Ante una avería crítica, contáctenos directamente al +31 (0)50-7110348 o a sales@partnerplc.com — estudiaremos un envío urgente el mismo día o un transporte dedicado para X20AI2437, según disponibilidad y destino.

2 analog current measurement inputsElectrically isolated analog channelsElectrically isolated sensor supplies16-bit digital converter resolutionNetTime timestamp: Moment of measurement The module is equipped with 2 current measurement inputs with 16-bit digital converter resolution.Each current measurement input has its own sensor supply. The two channels with their respective sensor supplies are electrically isolated from each other. The user can select between the two measurement ranges 4 to 20 mA and 0 to 25 mA.

Especificaciones

Specifications

I/O module	2 analog inputs 4 to 20 mA or 0 to 25 mA
B&R ID code	0xB784
Status indicators	I/O function per channel, operating state, module status, sensor power supply per channel
Module run/error	Yes, using LED status indicator and software
Inputs	Yes, using LED status indicator and software
Sensor power supply	Yes, using LED status indicator and software
Bus	0.05 W
Internal I/O	1.15 W
Additional power dissipation caused by actuators (resistive) [W]	-
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
DNV	Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck)
CCS	Yes
LR	ENV1
KR	Yes
ABS	Yes
BV	EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck
KC	Yes
Input	4 to 20 mA or 0 to 25 mA configurable using software
Input type	Differential input
Digital converter resolution	16-bit
Data output rate	4.7 to 960 samples per second, configurable using software
Output format	INT
4 to 20 mA	0.0007 %/°C
0 to 25 mA	0.0002 %/°C
0 to 25000 µA	INT 0x0000 - 0x61A8 / 1 LSB = 0x0001 = 1000 nA
Load	I_IN ≥ 0.1 mA: R < 8000 Ω I_IN ≥ 1 mA: R < 1100 Ω I_IN ≥ 4 mA: R < 510 Ω
Input protection	Up to 30 VDC, reverse polarity protection (max. 0.1 A)
Open-circuit detection	Yes, using software
Permissible input signal	0 to 25 mA
Output of digital value during overload	Configurable
Conversion procedure	Sigma-delta
DC	80 dB
50 Hz	Depends on the sampling rate: e.g. >130 dB for 50 samples per second
Common-mode range	0 to 7 V
Nonlinearity	<0.003%
Hardware	First-order low-pass filter / cutoff frequency 2.5 kHz
Software	Sinc4 filter
Channel - Channel	1000 VAC
Channel - Bus	1000 VAC
Channel - Ground	1000 VAC
Power consumption	0.75 W per channel
Nominal voltage	25 V ±2%
Nominal output current	Max. 30 mA
Short-circuit proof	Yes, continuous
Up to 100 kHz	≤2.2 mV
Up to 1 MHz	≤22 mV
Higher	≤100 mV
Typical	<50 mA
Maximum	60 mA
Behavior on short circuit	Current limiting
Electrical isolation	Channel isolated from channel and bus Sensor power supply isolated from sensor power supply Sensor power supply not isolated from channel
Horizontal	Yes
Vertical	Yes
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	-
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing
Operation	5 to 95%, non-condensing
Note	Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately.
Pitch	12.5+0.2 mm