B&R X20AI1744

Name: B&R X20AI1744
Brand: B&R
SKU: X20AI1744

Referencia: X20AI1744 · Marca: B&R

Precio bajo consulta

Solicitar presupuesto

Garantía de 12 meses (nuevo) · 3 meses (usado/reacondicionado)

Devoluciones en 30 días, sin comisión de reposición en piezas sin usar

Envío mediante

Datos rápidos

Disponibilidad	Confirmación bajo consulta
Categoría	Analog inputs
Ciclo de vida	active
Garantía	12 meses (nuevo) · 3 meses (usado/reacondicionado)

Envío y disponibilidad

¿Cuándo se puede enviar X20AI1744?

X20AI1744 se abastece bajo pedido — solicite un presupuesto y confirmaremos la disponibilidad exacta y el plazo de entrega para esta unidad concreta.

¿Puedo recoger X20AI1744 en persona?

Es posible recoger el pedido en nuestro almacén de Groningen, Países Bajos — contáctenos antes de realizar el pedido para confirmar disponibilidad y acordar un horario de recogida.

¿Está disponible el envío exprés?

Sí — menciónelo al solicitar un presupuesto para X20AI1744 e incluiremos las opciones de envío exprés en nuestra respuesta.

Nuestra planta está parada y lo necesitamos urgentemente — ¿pueden ayudar?

Ante una avería crítica, contáctenos directamente al +31 (0)50-7110348 o a sales@partnerplc.com — estudiaremos un envío urgente el mismo día o un transporte dedicado para X20AI1744, según disponibilidad y destino.

1 full-bridge strain gauge inputData output rate configurable from 0.1 Hz to 7.5 kHzSpecial operating modes (synchronous mode and multiple sampling)Configurable filter level This module works with both 4-wire and 6-wire strain gauge load cells. The concept applied by the module requires compensation in the measurement system. This compensation eliminates the absolute uncertainty in the measurement circuit, such as component tolerances, effective bridge voltage or zero point offset. The measurement precision refers to the absolute (compensated) value, which will only change as a result of changes in the operating temperature.

Especificaciones

Specifications

I/O module	1 full-bridge strain gauge input
B&R ID code	0x1CDE
Status indicators	Channel status, operating state, module status
Module run/error	Yes, using LED status indicator and software
Open circuit	Yes, using LED status indicator and software
Input	Yes, using LED status indicator and software
Bus	0.01 W
Internal I/O	0.5 W
Additional power dissipation caused by actuators (resistive) [W]	Max. +0.36
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
ATEX	Zone 2, II 3G Ex nA nC IIA T5 GcIP20, Ta (see X20 user's manual)FTZÚ 09 ATEX 0083X
UL	cULus E115267Industrial control equipment
HazLoc	cCSAus 244665Process control equipmentfor hazardous locations Class I, Division 2, Groups ABCD, T5
KC	Yes
Strain gauge factor	2 to 256 mV/V, configurable using software
Connection	4- or 6-wire connections
Input type	Differential, used to evaluate a full-bridge strain gauge
Digital converter resolution	24-bit
Conversion time	Depends on the configured data output rate
Data output rate	0.1 - 7500 samples per second, configurable using software (fDATA)
Cutoff frequency	5 kHz
Order	3
Slope	60 dB
ADC filter characteristics	Sigma-delta, see section "Filter characteristics of the sigma-delta A/D converter"
Operating range / Measurement sensor	85 to 5000 Ω
Influence of cable length	See section "Calculation example".
Input protection	RC protection
Common-mode range	0 to 3 VDC Permissible input voltage range (with regard to the electric potential strain gauge GND) on inputs "Input +" and "Input -"
Insulation voltage between input and bus	500 Veff
Conversion procedure	Sigma-delta
Broken bridge supply line	Value approaching 0
Broken sensor line	Value approaching ±end value (status bit "Line monitoring" is set in register "Module status")
Valid range of values	0xFF800001 to 0x007FFFFF (-8,388,607 to 8,388,607)
Voltage	5.5 VDC / Max. 65 mA
Short-circuit and overload-proof	Yes
Voltage drop for short-circuit protection	Max. 0.2 VDC at 65 mA and 25°C
2 mV/V	1.31 nV
4 mV/V	2.62 nV
8 mV/V	5.25 nV
16 mV/V	10.49 nV
32 mV/V	20.98 nV
64 mV/V	41.96 nV
128 mV/V	83.92 nV
256 mV/V	167.85 nV
Max. gain drift	12 ppm/°C
Max. offset drift	2 ppm/°C
Nonlinearity	<10 ppm
Electrical isolation	Bus isolated from analog input and strain gauge supply voltageChannel not isolated from I/O power supply
Horizontal	Yes
Vertical	Yes
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	See section "Hardware configuration"
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing
Operation	5 to 95%, non-condensing
Note	Order 1x terminal block X20TB12 separately.Order 1x bus module X20BM11 separately.
Pitch	12.5+0.2 mm