B&R X20MM3332 USED

X20MM3332
43 people are viewing this right now

Hurry Up! Only 505 left in stock!

In stock
SKU
X20MM3332 USED
B&RShop

Guarantee Safe Checkout

SKU : X20MM3332
Brand : B&R
Description:
Material number:
X20MM3332
Description:
  • 3 full-bridge outputs (H-bridges)
  • High component density
  • 3 A continuous current
  • 5 A peak current
  • Readable current

The 3 outputs on the motor module are designed as full-bridge outputs. The continuous current per channel is 3 A at a peak current of up to 5 A. Integrated diagnostics offer the possibility to read back the output current for each channel using the application.

The module offers extensive possibilities for controlling motors, valves or resistive loads and is particularly well suited for controlling brush DC motors. Because the outputs are designed as full-bridge outputs, the motors can be moved in both directions.

State: Used
Specification :
Short description
I/O module 3 full bridge outputs
General information
B&R ID code 0xA982
Status indicators I/O function per channel, operating state, module status
Diagnostics
Module run/error Yes, using LED status indicator and software
Output Yes, using LED status indicator and software
I/O power supply Yes, using LED status indicator and software
Power consumption
Bus 0.01 W
Internal I/O 0.8 W
External I/O Corresponding to external load
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
UKCA Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
EAC Yes
KC Yes
Motor bridge - Power unit
Quantity 3
Variant H bridge
Type Full bridge
High-side driver
Low-side driver
Nominal voltage 24 VDC
Switching voltage 24 VDC (-15% / +20%)
Nominal current 3 A
Maximum current 5 A (250 ms)
Total nominal current 10 A
Current value measurement
Resolution 100 mA
Data collection In driver
Output protection Thermal shutdown in the event of overcurrent or short circuit
Supply voltage No reverse polarity protection
Insulation voltage between channel and bus 500 Veff
Protective circuit
External 24 VDC power supply - maximum current 10 A (melting fuse)
Electrical properties
Electrical isolation Bus isolated from channel and internal I/O power supply
Channel not isolated from channel and internal I/O power supply
Operating conditions
Mounting orientation
Horizontal Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation 0 to 50°C
Vertical mounting orientation Not permitted
Derating See section "Derating".
Storage -25 to 70°C
Transport -25 to 70°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB12 separately.
Order 1x bus module X20BM11 separately.
Pitch 12.5+0.2 mm
Write Your Own Review
You're reviewing:B&R X20MM3332 USED

Get in Touch

We would love to hear from you about our entire service. Your comments and suggestions will be highly appreciated. Please complete the form below.

PartnerPLC.com

We spend time and help you finding absolute, new, used and refurbished products around the world. Need help please contact one of our team members using our Chat, E-mail or phonenumbers

- [email protected]

- + 31 (0) 50 - 7110348 

- Use our chat in the lower right corner on our screen.

Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price. We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.

B&R X20MM3332 USED

€65.00