B&R X20MM2436 USED

X20MM2436
48 people are viewing this right now

Hurry Up! Only 63 left in stock!

In stock
SKU
X20MM2436 USED
B&RShop

Guarantee Safe Checkout

SKU : X20MM2436
Brand : B&R
Description:
Material number:
X20MM2436
Description:
  • 2x outputs (H bridge) with PWM control and 24 to 39 VDC ±25% supply
  • 3 A nominal current (3.5 A max current)
  • 15 Hz to 50 kHz frequency, 16-bit
  • Frequency mode with 10 to 6553.5 Hz or 1 to 655.35 Hz resolution.
  • PWM resolution, 15-bit + sign, minimum 10 ns
  • Configurable dither
  • 2x 2 inputs 24V, can be configured as AB
  • Sink connection
  • 1-wire connections

The motor bridge module is used to control 2 DC motors with a nominal voltage of 24 to 39 VDC ±25% at a nominal current up to 3 A. The module can be reconfigured and used in current controller mode for controlling inductive loads. The module is also equipped with 4 digital inputs, which can be used as incremental counters. Each motor is controlled with a full-bridge (H-bridge). This enables the motors to be moved in both directions.

State: Used
Specification :
Short description
I/O module 2-channel PWM motor bridge, 2 AB incremental encoders
General information
B&R ID code 0x26B5
Status indicators I/O function per channel, operating state, module status
Diagnostics
Module run/error Yes, using LED status indicator and software
Output Yes, using LED status indicator and software
I/O power supply Yes, using software
Power consumption
Bus 0.01 W
Internal I/O -
External I/O
24 VDC 2.45 W
48 VDC 3.15 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
UKCA Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cURus E225616
Power conversion equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
LR ENV1
KR Yes
ABS Yes
BV EC33B
Temperature: 5 - 55°C
Vibration: 4 g
EMC: Bridge and open deck
EAC Yes
KC Yes
Digital inputs
Quantity 4
Nominal voltage 24 VDC
Input voltage 24 VDC (-15% / +20%)
Input current at 24 VDC Approx. 1.3 mA
Input circuit Sink
Input filter
Hardware <5 µs
Software -
Connection type 1-wire connections
Input resistance Typ. 18 kΩ
Additional functions 2x AB incremental encoder, 1x ABR counter, 2x event counter, 2x period duration/gate measurement
Switching threshold
Low <5 VDC
High >15 VDC
Insulation voltage between channel and bus 500 Veff
AB incremental encoder
Quantity 2
Encoder inputs 24 V, asymmetrical
Counter size 16-bit
Input frequency Max. 50 kHz
Evaluation 4x
Signal form Square wave pulse
PWM output
Quantity 2
Nominal voltage 24 to 39 VDC ±25%
Nominal current 3 A
Maximum current 3.5 A (2 s)
PWM frequency Standard operating mode: 15 Hz to 50 kHz
Frequency operating mode: 1 Hz to 6553.5 Hz
SuperVibe operating mode: 1 Hz to 50 kHz
Actuator power supply
Supply External
Fuse Required line fuse: Max. 10 A, slow-blow
Output protection Thermal shutdown in the event of overcurrent or short circuit
Variant H bridge
Configurable dither Amplitude, frequency
Period duration resolution (PWM/current operating mode) 16-bit, min. 20 μs
Frequency resolution Frequency mode
Scaling 0.1 Hz <3000 Hz: 0.1 Hz; 3000 to 6553.5 Hz: 0.1 to 0.4 Hz
Scaling 0.01 Hz <300 Hz: 0.01 Hz; 300 to 655.35 Hz: 0.01 to 0.04 Hz

SuperVibe mode
Scaling 1 Hz <10 kHz: 1 Hz; 10 to 50 kHz: 1 to 40 Hz
Scaling 0.1 Hz <1000 Hz: 0.1 Hz; 1000 to 6553.5 Hz: 0.1 to 4 Hz
Phase shift PWM1 to PWM2 180° - if possible (according to operating mode)
DC bus capacitance 100 μF
PWM pulse width 15 bits plus sign ≥10 ns
Frequency mode 15 bits plus sign ≥10 ns
Insulation voltage between channel and bus 500 Veff
Electrical properties
Electrical isolation
Channel isolated from bus

Channel not isolated from channel
Operating conditions
Mounting orientation
Horizontal Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 50°C
Vertical mounting orientation Not permitted
Derating See section "Derating".
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB12 separately.
Order 1x bus module X20BM31 separately.
Pitch 25+0.2 mm
Write Your Own Review
You're reviewing:B&R X20MM2436 USED

Get in Touch

We would love to hear from you about our entire service. Your comments and suggestions will be highly appreciated. Please complete the form below.

PartnerPLC.com

We spend time and help you finding absolute, new, used and refurbished products around the world. Need help please contact one of our team members using our Chat, E-mail or phonenumbers

- [email protected]

- + 31 (0) 50 - 7110348 

- Use our chat in the lower right corner on our screen.

Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price. We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.

B&R X20MM2436 USED

€199.00