B&R X20DO8232 NEW

X20DO8232
44 people are viewing this right now

Hurry Up! Only 1 left in stock!

In stock
SKU
X20DO8232 NEW
B&RShop

Guarantee Safe Checkout

SKU : X20DO8232
Brand : B&R
Description:
Material number:
X20DO8232
Description:
  • 8 digital outputs with 2 A
  • Rated voltage 12 VDC
  • Source connection
  • 1-wire connection
  • Power feed integrated in the module
  • Integrated output protection

The module is equipped with 8 outputs for 1-wire connections. The nominal output current is 2 A and the nominal voltage is 12 VDC.

The output supply is fed directly to the module. An additional supply module is not needed. There is no connection between the module and the I/O supply potential on the bus module.

State: New
Specification :
Short description
I/O module 8 digital outputs 12 VDC for 1-wire connections
General information
B&R ID code 0xA4AD
Status indicators I/O function per channel, operating state, module status
Diagnostics
Module run/error Yes, using LED status indicator and software
Outputs Yes, using LED status indicator and software (output error status)
Supply voltage monitoring Yes, using software
Power consumption
Bus 0.22 W
Internal I/O -
External I/O 0.82 W
Additional power dissipation caused by actuators (resistive) [W] +4.48
Certifications
CE Yes
UKCA Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV Temperature: B (0 to 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
LR ENV1
KR Yes
ABS Yes
BV EC33B
Temperature: 5 - 55°C
Vibration: 4 g
EMC: Bridge and open deck
EAC Yes
KC Yes
Digital outputs
Variant Current-sourcing FET
Nominal voltage 12 VDC
Switching voltage 12 VDC (-15% / +20%)
Nominal output current 2 A
Total nominal current 8 A
Connection type 1-wire connections
Output circuit Source
Output protection Thermal shutdown in the event of overcurrent or short circuit (see value "Short-circuit peak current")
Internal freewheeling diode for switching inductive loads (see section "Switching inductive loads")
Reverse polarity protection of supply voltage
Actuator power supply
Supply External
Fuse Required line fuse: Max. 10 A, slow-blow
Diagnostic status Output monitoring with 10 ms delay
Leakage current when the output is switched off 5 μA
RDS(on) 140 mΩ
Peak short-circuit current <12 A
Switch-on in the event of overload shutdown or short-circuit shutdown Approx. 10 ms (depends on the module temperature)
Switching delay
0 → 1 <300 μs
1 → 0 <300 μs
Switching frequency
Resistive load Max. 500 Hz, 600 Hz at max. 250 mA load
Inductive load See section "Switching inductive loads".
Braking voltage when switching off inductive loads Typ. 50 VDC
Insulation voltage between channel and bus 500 Veff
Additional functions Outputs can be connected in parallel to increase the output current.
Electrical properties
Electrical isolation Channel isolated from bus and I/O power supply
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating See section "Derating".
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB12 separately.
Order 1x bus module X20BM11 separately.
Pitch 12.5+0.2 mm
Write Your Own Review
You're reviewing:B&R X20DO8232 NEW

Get in Touch

We would love to hear from you about our entire service. Your comments and suggestions will be highly appreciated. Please complete the form below.

PartnerPLC.com

We spend time and help you finding absolute, new, used and refurbished products around the world. Need help please contact one of our team members using our Chat, E-mail or phonenumbers

- [email protected]

- + 31 (0) 50 - 7110348 

- Use our chat in the lower right corner on our screen.

Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price. We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.

B&R X20DO8232 NEW

€1,058.94