• 0 My Wish List
  • My Cart 0
  • Q
Q
B&R X20AO2632 NEW WITHOUT BOX
B&R X20AO2632 NEW WITHOUT BOX
B&R X20AO2632 NEW WITHOUT BOX
B&R X20AO2632 NEW WITHOUT BOX
B&R X20AO2632 NEW WITHOUT BOX

B&R X20AO2632 NEW WITHOUT BOX

€559.00
Be the first to review this product
X20AO2632
39 people are viewing this right now

Hurry Up! Only 1 left in stock!

Add to Wish List Add to Compare
In stock
SKU
X20AO2632 NEW WITHOUT BOX
B&RShopX20 systems

Guarantee Safe Checkout

SKU : X20AO2632
Brand : B&R
Description:
Material number:
X20AO2632
Description:
  • 2 analog outputs
  • Either current or voltage signal possible
  • 16-bit digital converter resolution
  • NetTime timestamp: Switch-off time

The module is equipped with 2 outputs with 16-bit (including sign) digital converter resolution. It is possible to select between the current and voltage signal using different terminals.

This module is designed for X20 6-pin terminal blocks. If needed (e.g. for logistical reasons), the 12-pin terminal block can also be used.

NetTime timestamp for output

For many applications, not only the output value is important, but also the exact switching time. The module is equipped with a NetTime timestamp function for this that can define a switching time to the nearest microsecond.

The timestamp function is based on synchronized timers. The CPU can predefine output events and provide them with a timestamp. After transferring the respective data, including the exact time, the module executes the predefined action at the exactly defined time.

State: New without box
Specification :
Short description
I/O module 2 analog outputs ±10 V or 0 to 20 mA
General information
B&R ID code 0x1BA4
Status indicators I/O function per channel, operating state, module status
Diagnostics
Module run/error Yes, using LED status indicator and software
Channel type Yes, using software
Power consumption
Bus 0.01 W
Internal I/O 1.1 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
UKCA Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV Temperature: B (0 to 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
LR ENV1
KR Yes
ABS Yes
BV EC33B
Temperature: 5 - 55°C
Vibration: 4 g
EMC: Bridge and open deck
EAC Yes
KC Yes
Analog outputs
Output ±10 V or 0 to 20 mA, via different terminal connections
Digital converter resolution
Voltage ±15-bit
Current 15-bit
Conversion time 50 µs for all outputs
Settling time on output change over entire range 500 μs (Rev. <H0: 1 ms)
Switch on/off behavior Internal enable relay for startup
Max. error
Voltage
Gain 0.045%
Offset 0.025%
Current
Gain 0.09%
Offset 0.045%
Output protection Short-circuit proof
Output format
Voltage INT 0x8000 - 0x7FFF / 1 LSB = 0x0001 = 305.176 µV
Current INT 0x0000 - 0x7FFF / 1 LSB = 0x0001 = 610.352 nA
Load per channel
Voltage Max. ±10 mA, load ≥1 kΩ
Current Load max. 600 Ω (Rev. ≥ J0), 500 Ω (Rev. < J0)
Short-circuit proof Current limiting ±40 mA
Output filter First-order low-pass filter / cutoff frequency 10 kHz
Max. gain drift
Voltage 0.015%/°C
Current 0.02 %/°C
Max. offset drift
Voltage 0.013 %/°C
Current 0.013 %/°C
Error caused by load change
Voltage Max. 0.11%, from 10 MΩ → 1 kΩ, resistive
Current Max. 0.5%, from 1 Ω → 600 Ω, resistive
Nonlinearity <0.007%
Insulation voltage between channel and bus 500 Veff
Electrical properties
Electrical isolation Channel isolated from bus
Channel not isolated from channel
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB06 or X20TB12 separately.
Order 1x bus module X20BM11 separately.
Pitch 12.5+0.2 mm
Write Your Own Review
You're reviewing:B&R X20AO2632 NEW WITHOUT BOX

Get in Touch

We would love to hear from you about our entire service. Your comments and suggestions will be highly appreciated. Please complete the form below.

PartnerPLC.com

We spend time and help you finding absolute, new, used and refurbished products around the world. Need help please contact one of our team members using our Chat, E-mail or phonenumbers

- [email protected]

- + 31 (0) 50 - 7110348 

- Use our chat in the lower right corner on our screen.

Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price. We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.

B&R X20AO2632 NEW WITHOUT BOX

€559.00