Siemens 6ES7138-4FB04-0AB0 NEW WITHOUT BOX

6ES7138-4FB04-0AB0
28 people are viewing this right now

Hurry Up! Only 2 left in stock!

In stock
SKU
6ES7138-4FB04-0AB0 NEW WITHOUT BOX
ShopSiemens

Guarantee Safe Checkout

SKU : 6ES7138-4FB04-0AB0
Brand : Siemens
Description:
Material number:

X67AM1323

Description:
  • 2 analog inputs, 2 analog outputs, each 0 to 20 mA
  • Configurable digital input filters
  • Very short cycle times
  • Optimal shield grounding on all channels

The module is equipped with 2 inputs and 2 outputs with 12-bit digital converter resolution. The range of the input/output signal is 0 to 20 mA.

State: New without box
Specification :
Short description
I/O module 2 analog inputs, 2 analog outputs, each 0 to 20 mA
General information
B&R ID code 0x1466
Status indicators I/O function per channel, supply voltage, bus function
Diagnostics  
Inputs Yes, using LED status indicator and software
I/O power supply Yes, using LED status indicator and software
Connection type  
X2X Link M12, B-coded
Inputs/Outputs 4x M12, A-coded
I/O power supply M8, 4-pin
Power consumption  
Internal I/O 3 W
X2X Link power supply 0.75 W
Certifications  
CE Yes
UKCA Yes
ATEX Zone 2, II 3G Ex nA IIA T5 Gc
IP67, Ta = 0 - Max. 60°C
TÜV 05 ATEX 7201X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
EAC Yes
KC Yes
I/O power supply
Nominal voltage 24 VDC
Voltage range 18 to 30 VDC
Integrated protection Reverse polarity protection
Power consumption  
Sensor/Actuator power supply Max. 12 W
Sensor/Actuator power supply
Voltage I/O power supply minus voltage drop for short-circuit protection
Voltage drop for short-circuit protection at 0.5 A Max. 2 VDC
Summation current Max. 0.5 A
Short-circuit proof Yes
Analog inputs
Input 0 to 20 mA
Input type Differential input
Digital converter resolution 12-bit
Conversion time 400 µs for both inputs
Output format INT
Output format  
Current INT 0x0000 - 0x7FFF / 1 LSB = 0x0010 = 4.883 µA
Load <300 Ω
Input protection Protection against wiring with supply voltage
Permissible input signal Max. ±30 V
Output of digital value during overload  
Undershoot 0x0000
Overshoot 0x7FFF
Conversion procedure Successive approximation
Max. error  
Gain 0.1%
Offset 0.05%
Max. gain drift 0.013 %/°C
Max. offset drift 0.02 %/°C
Common-mode rejection  
DC >50 dB
50 Hz >50 dB
Common-mode range ±11 V
Crosstalk between channels <-70 dB
Nonlinearity <0.1%
Insulation voltage between channel and bus 500 Veff
Input filter  
Cutoff frequency 300 Hz
Slope 40 dB
Analog outputs
Output 0 to 20 mA
Digital converter resolution 12-bit
Conversion time 400 µs for both outputs
Settling time on output change over entire range Approx. 1 ms
Switch on/off behavior Internal enable relay for startup and errors
Output protection Protection against wiring with supply voltage, short-circuit proof
Output format INT 0x0000 - 0x7FFF / 1 LSB = 0x0008 = 4.883 µA
Load per channel Max. load is 400 Ω
Output filter First-order low-pass filter / cutoff frequency 1.5 kHz
Max. gain drift 0.015%/°C
Max. offset drift 0.032%/°C
Error caused by load change Max. 0.5%, from 1 Ω → 400 Ω, resistive
Nonlinearity <0.1%
Insulation voltage between channel and bus 500 Veff
Output response when the power supply is switched on/off An enable relay is switched on at a defined value ≠ 0, default setting = 10 kΩ to GND
Short-circuit proof  
Current limiting ±40 mA
To GND Yes
To sensor or I/O power supply Yes
Max. error at 25°C and 50 Ω load  
Gain 0.2%
Offset 0.05%
Electrical properties
Electrical isolation
Channel isolated from bus
 
Channel not isolated from channel
Operating conditions
Mounting orientation  
Any Yes
Installation elevation above sea level  
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP67
Ambient conditions
Temperature  
Operation -25 to 60°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Mechanical properties
Dimensions  
Width 53 mm
Height 85 mm
Depth 42 mm
Weight 175 g
Torque for connections  
M8 Max. 0.4 Nm
M12 Max. 0.6 Nm
Write Your Own Review
You're reviewing:Siemens 6ES7138-4FB04-0AB0 NEW WITHOUT BOX

Get in Touch

We would love to hear from you about our entire service. Your comments and suggestions will be highly appreciated. Please complete the form below.

PartnerPLC.com

We spend time and help you finding absolute, new, used and refurbished products around the world. Need help please contact one of our team members using our Chat, E-mail or phonenumbers

- [email protected]

- + 31 (0) 50 - 7110348 

- Use our chat in the lower right corner on our screen.

Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price. We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.

Siemens 6ES7138-4FB04-0AB0 NEW WITHOUT BOX

€299.00