| Specification : |
Short description
| Interfaces |
1x RS232, 1x Ethernet, 1x POWERLINK (V1/V2), 2x USB, 1x X2X Link |
| System module |
Controller |
General information
| B&R ID code |
0xC370 |
| Cooling |
Fanless |
| Status indicators |
CPU function, Ethernet, POWERLINK, CompactFlash, battery |
| Diagnostics |
|
| Battery |
Yes, using LED status indicator and software |
| CPU function |
Yes, using LED status indicator |
| CompactFlash |
Yes, using LED status indicator |
| Ethernet |
Yes, using LED status indicator |
| POWERLINK |
Yes, using LED status indicator |
| Temperature |
Yes, using software register |
| Support |
|
| Controller redundancy |
No |
| Storage health data support |
Yes |
| ACOPOS support |
Yes |
| Visual Components support |
Yes |
| Power consumption without interface module and USB |
8.6 W |
| Power consumption for X2X Link power supply |
1.42 W |
| Power consumption |
|
| Internal I/O |
0.6 W |
| Additional power dissipation caused by actuators (resistive) [W] |
- |
| Certifications |
|
| CE |
Yes |
| UKCA |
Yes |
| ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X |
| UL |
cULus E115267
Industrial control equipment |
| HazLoc |
cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5 |
| DNV |
Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck) |
| LR |
ENV1 |
| KR |
Yes |
| ABS |
Yes |
| BV |
EC33B
Temperature: 5 - 55°C
Vibration: 4 g
EMC: Bridge and open deck |
| EAC |
Yes |
| KC |
Yes |
CPU and X2X Link power supply
| Input voltage |
24 VDC -15% / +20% |
| Input current |
Max. 1.5 A |
| Fuse |
Integrated, cannot be replaced |
| Reverse polarity protection |
Yes |
X2X Link power supply output
| Nominal output power |
7 W |
| Parallel connection |
Yes |
| Redundant operation |
Yes |
Input I/O power supply
| Input voltage |
24 VDC -15% / +20% |
| Fuse |
Required line fuse: Max. 10 A, slow-blow |
Output I/O power supply
| Nominal output voltage |
24 VDC |
| Permissible contact load |
10 A |
Power supply - General information
| Status indicators |
Overload, operating status, module status, RS232 data transfer |
| Diagnostics |
|
| RS232 data transfer |
Yes, using LED status indicator |
| Module run/error |
Yes, using LED status indicator and software |
| Overload |
Yes, using LED status indicator and software |
| Electrical isolation |
|
| I/O supply - I/O power supply |
No |
| CPU/X2X Link supply - CPU/X2X Link power supply |
Yes |
Controller
| CompactFlash slot |
1 |
| Real-time clock |
Nonvolatile, resolution 1 s, -10 to 10 ppm accuracy at 25°C |
| FPU |
Yes |
| Processor |
|
| Type |
Atom E620T |
| Clock frequency |
0.6 GHz |
| L1 cache |
|
| Data code |
24 kB |
| Program code |
32 kB |
| L2 cache |
512 kB |
| Integrated I/O processor |
Processes I/O data points in the background |
| Modular interface slots |
1 |
| Remanent variables |
Max. 256 kB |
| Shortest task class cycle time |
400 µs |
| Typical instruction cycle time |
0.0075 µs |
| Data buffering |
|
| Battery monitoring |
Yes |
| Lithium battery |
Min. 2 years at 23°C ambient temperature |
| Standard memory |
|
| RAM |
256 MB DDR2 SDRAM |
| User RAM |
1 MB SRAM |
Interfaces
| Interface IF1 |
|
| Signal |
RS232 |
| Variant |
Connection via 12-pin terminal block X20TB12 |
| Max. distance |
900 m |
| Transfer rate |
Max. 115.2 kbit/s |
| Interface IF2 |
|
| Signal |
Ethernet |
| Variant |
1x RJ45 shielded |
| Line length |
Max. 100 m between 2 stations (segment length) |
| Transfer rate |
10/100/1000 Mbit/s |
| Transfer |
|
| Physical layer |
10BASE-T/100BASE-TX/1000BASE-T |
| Half-duplex |
Yes |
| Full-duplex |
Yes |
| Autonegotiation |
Yes |
| Auto-MDI/MDIX |
Yes |
| Interface IF3 |
|
| Fieldbus |
POWERLINK (V1/V2) managing or controlled node |
| Type |
Type 4 |
| Variant |
1x RJ45 shielded |
| Line length |
Max. 100 m between 2 stations (segment length) |
| Transfer rate |
100 Mbit/s |
| Transfer |
|
| Physical layer |
100BASE-TX |
| Half-duplex |
Yes |
| Full-duplex |
POWERLINK mode: No / Ethernet mode: Yes |
| Autonegotiation |
Yes |
| Auto-MDI/MDIX |
Yes |
| Interface IF4 |
|
| Type |
USB 1.1/2.0 |
| Variant |
Type A |
| Max. output current |
0.5 A |
| Interface IF5 |
|
| Type |
USB 1.1/2.0 |
| Variant |
Type A |
| Max. output current |
0.5 A |
| Interface IF6 |
|
| Fieldbus |
X2X Link master |
Electrical properties
| Electrical isolation |
Ethernet (IF2), POWERLINK (IF3) and X2X (IF6) isolated from each other, from other interfaces and from PLC |
Operating conditions
| Mounting orientation |
|
| Horizontal |
Yes |
| Vertical |
Yes |
| Installation elevation above sea level |
|
| 0 to 2000 m |
No limitation |
| >2000 m |
Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 |
IP20 |
Ambient conditions
| Temperature |
|
| Operation |
|
| Horizontal mounting orientation |
-25 to 60°C |
| Vertical mounting orientation |
-25 to 50°C |
| Derating |
See section "Derating". |
| Storage |
-40 to 85°C |
| Transport |
-40 to 85°C |
| Relative humidity |
|
| Operation |
5 to 95%, non-condensing |
| Storage |
5 to 95%, non-condensing |
| Transport |
5 to 95%, non-condensing |
Mechanical properties
| Note |
Order application memory (CompactFlash) separately
Backup battery included in delivery
X20 end cover plate (right) included in delivery
12-pin X20 terminal block included in delivery
Interface module slot covers included in delivery |
| Dimensions |
|
| Width |
150 mm |
| Height |
99 mm |
| Depth |
85 mm |
| Weight |
400 g |
|
